Error Messages; Self-Diagnostic Display - Canon iR3530 Manual

Error Messages

This section explains the various messages that appear on the touch panel display, along with
possible causes and remedies.
For explanations of messages that are not listed here, see the Reference Guide and Network
Guide.

Self-Diagnostic Display

Perform the necessary procedures according to the displayed self-diagnostic error message.
Self-diagnostic error messages appear on the touch panel display at the following times:
•
When scanning or printing cannot be performed because of an operational error
•
When you need to make a decision or take some action during scanning or printing
•
When you need to make a decision or take some action while browsing the network
The following is a list of self-diagnostic error messages, along with their possible causes and
remedies.
Set the IP Address.
Cause
8
Remedy
8-8

Error Messages

This machine is not set with an IP address.
Specify the IP Address Settings in TCP/IP Settings in Network Settings in System Settings
(from the Additional Functions screen), then turn the machine's main power OFF and back
ON again.