Table of Contents
Advertisement
EMU
The EMU is hot-pluggable. See Figure 8–3 as needed during the removal and installation.
Complete the procedure in Table 8–2 to remove an EMU. Complete the procedure in
Table 8–3 to install an EMU.
Figure 8–3. EMU removal and installation
1.
Press the release tab and pivot the lever.
2.
Remove the EMU from the enclosure.
1.
Press the release tab and pivot the lever.
2.
Insert the EMU until its lever engages the enclosure.
3.
Lift the lever upward until the lever locks.
4.
If enclosure power is applied, verify that the following EMU status LED indication is display.
Removal and Installation Procedures
CXO6925B
Table 8–2 Removing an EMU
Table 8–3 Installing an EMU
8–5
Advertisement
Table of Contents
