Addresses Page - McAfee SG310 Administration Manual

Firewall menu options
Definitions
Select the following checkboxes:
4
• FTP
• HTTP (Web)
• HTTPS
• SSH
• ICMP Echo Request (Ping)
Click Finish.
5

Addresses page

Addresses are a single IP address, or range of IP addresses, or a DNS hostname. Network packets can be
matched by source or destination address. There is no need to add addresses for the interfaces of the UTM
Firewall appliance; these are predefined. The Addresses page is shown in
Figure 158 Addresses tab
Adding an IP address or range
From the Firewall menu, click Definitions > Addresses tab. The Addresses page opens. Predefined
1
addresses are displayed.
Select Single Address or Range from the Type list.
2
Click New. The Address Range page appears
3
Figure 159 Address Range page
Enter the name of the range in the Name field.
4
Enter the IP address or range in the IP Address field.
5
Click Finish.
6
Example: Adding a single IP address
This example adds a single IP address for the administration personal computer used to manage the
appliance.
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 159).
Figure 158.
155