Network Setup menu options
Setting up dial-in access
For details on adding user accounts for dial-in access, and configuring the UTM Firewall appliance to
enable authentication against a RADIUS or TACACS+ server, see
Select a packet size for the MTU, or accept the default value.
9
Click Finish. The Port Settings tab now becomes available. You can adjust settings if desired. Now
10
configure the dial-in client. See the next procedure,
Connecting a dial-in client
Remote users can dial in to the UTM Firewall appliance using the standard Windows Dial-Up Networking
software. The network connection wizard guides you through setting up a remote access connection. The
following instructions are for Windows XP.
Click Start > Control Panel > Network Connections and select the New Connection Wizard icon.
1
The New Connection Wizard appears
Figure 57 New Connection WIzard – Welcome
Click Next. The Network Connection Type page appears
2
Figure 58 New Connection WIzard – Network Connection Type
Select the Connect to the network at my workplace option. Click Next to continue. The Network
3
Connection page appears
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure
57).
(Figure
59).
Users
menu.
Connecting a dial-in
client.
(Figure
58).
63