McAfee SG310 Administration Manual page 85

Network Setup menu options
Wireless
[Optional] if there is interference from another access point, select another channel the operating
9
frequency or channel for the wireless network from the Channel/Frequency list. The channels and
frequencies that appear depend on the region selected in the advanced settings. For further information,
see Configuring advanced wireless
• 1/2412 MHz (default)
• 2/2417 MHz
• 3/2422 MHz
• 4/2427 MHz
• 5/2432 MHz
• 6/2437 MHz
• 7/2442 MHz
• 8/2447 MHz
• 9/2452 MHz
• 10/2457 MHz
• 11/2462 MHz
Tip: Changing to a different channel may give better performance. Channels do not overlap if they are at least
5 channels apart. For example, channels 1, 6, and 11 do not overlap.
[Recommended only if all wireless clients are trusted] To bridge between clients, select the Bridge
10
Between Clients checkbox. This setting enables the access point to forward packets between clients at
the wireless level so that wireless clients are able to "see" each other. This means that packets between
wireless clients are not restricted by the firewall. If you disable this setting, but still want to allow access
between clients in the firewall, you usually also need to configure each client to route to other clients via
the access point.
Select a wireless method of security from the Security Method list. The fields that appear vary
11
depending on your selection. Available options are:
• None — [Not recommended] Select this option for no security and click Finish. You have completed
your access point configuration.
• WEP — Go to Step 12 (page
• WEP with 802.1X — Go to
• WPA-PSK — Go to
• WPA-Enterprise — Go to
If you chose the WEP security method, complete the following fields
12
McAfee UTM Firewall 4.0.4 Administration Guide
features. Available options (USA, FCC region) are:
85).
Step 13 (page 86)
Step 14 (page 86)
Step 15 (page 87).
(Figure 84).
85