McAfee SG310 Administration Manual page 18

Introduction
UTM Firewall menus
Table 6 Network Setup menu
Network Setup menu
options
Quick Setup
Network Setup
DHCP Server
Web Cache
Traffic Shaping
SIP
Table 7 Firewall menu
Firewall menu options
Definitions
Packet Filtering
NAT
Connection Tracking
Intrusion Detection
Access Control
Antivirus
Antispam
Table 8 VPN menu
VPN menu options
PPTP
L2TP
18 McAfee UTM Firewall 4.0.4 Administration Guide
Description
Opens the Quick Setup page for accessing the Quick Setup Wizard, the product
registration links, and the guided configurations.
Opens the Connections, Failover & High Availability, Routes, DNS, and IPv6 tabs for
configuring network-specific settings of the appliance.
See:
• Network overview.
• Failover, load balancing, and high
• Routes.
• DNS.
• IPv6.
Opens the DHCP Server Configuration page for handing out IP addresses. See
Server.
Opens the Web Cache pages for caching pages on the UTM Firewall appliance. See
cache.
Note: Not applicable to the SG310 or SG560 models.
Opens the Traffic Shaping pages for enabling and configuring QoS (Quality of Service)
traffic. See Traffic Shaping.
Opens the SIP (Session Initiation Protocol) Proxy page for enabling and configuration.
See SIP.
Note: Not applicable to the SG310 model.
Description
Opens the definitions pages for Service Groups, Addresses, and Interfaces. See
Definitions.
Opens the Packet Filtering, Incoming Access, Custom Firewall Rules, and Custom IPv6
Firewall Rules tabs. See Packet
Opens NAT pages for Port Forwarding, Source NAT, 1 to 1 NAT, Masquerading, and UPnP
Gateway. See NAT.
Opens the Connection Tracking page in which you can enable or disable specific options
for connection tracking. Connection tracking keeps a record of packets that have passed
through the appliance and how the packets are interrelated. See
Opens the configuration pages for Intrusion Detection and Prevention. See
Detection Systems.
Note: Snort IDS (Intrusion Detection System) and IPS (Intrusion Prevention
System) features are not applicable to the SG310 or SG560 models. Basic IDB
(Intrusion Detection and Blocking) is available on all UTM Firewall models.
Opens the Authorizations pages for Access Control, ACL, Web Lists, Policy, and Web
Filtering. See Access control.
Opens the Antivirus page where you can configure antivirus for email, Web downloads,
and FTP. See Antivirus.
Note: Not applicable to the SG310 or SG560 models.
Opens the Antispam page for configuring reputation thresholds for SMTP mail. See
Antispam (TrustedSource).
Description
Opens the page for configuring the appliance as a PPTP VPN client or server. See
VPN Client, and PPTP VPN Server.
Opens the page for configuring the appliance as an L2TP VPN client or server. See
VPN Client, and L2TP VPN Server.
availability.
filtering.
DHCP
Web
Connection tracking.
Intrusion
PPTP
L2TP