McAfee SG310 Administration Manual page 97

Network Setup menu options
Bridging
Click Next. The Edit Bridge Configuration tab appears
4
Figure 96 Network Setup Edit Bridge Configuration page
Select the checkbox for the other Interface you want to bridge.
5
Click Finish.
6
Example 2: Adding a bridge without transfer
This example steps through the sequence when simply adding a new bridge interface without transferring
settings from an existing configuration.
From the Network Setup menu, click Network Setup and select the Connections tab. The
1
Connections page appears.
From below the main Connections table, select Bridge from the list and click Add. The Bridge
2
Configuration tab appears.
From the Existing Interface Configuration list, select None.
3
Click Next. The Bridge Configuration tab containing the Direct Connection Settings page appears
4
(Figure 97).
Figure 97 Bridge Configuration Direct Connection Settings page
Enter test_bridge in the Connection Name field.
5
Enter 1.1.1.3 in the IP Address field.
6
Click Next. The Edit Bridge Configuration page appears
7
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 96).
(Figure 98).
97