McAfee SG310 Administration Manual page 271

VPN menu features
IPSec Advanced Setup wizard
Figure 270 IPSec VPN — Remote Endpoint Settings page — Main key mode
Fill in the fields.
Enter the IP address in the Remote Party's IP Address field.
a
This example leaves the Optional Endpoint ID blank.
b
Click Next. The Phase 1 Settings page appears
5
Figure 271 IPSec VPN — Phase 1 Settings page
Fill in the fields.
Allow all of the defaults for the Key lifetime, Rekey margin, and Rekey fuzz fields.
a
Enter the Preshared Secret.
b
Click Next. The Phase 2 Settings page appears
6
Figure 272 IPSec VPN — Phase 2 Settings page
You must specify at least one Local and Remote network pair for the IPSec tunnel. If this is a host-to-host
7
tunnel, you need to explicitly add the local and remote endpoint for the tunnel as a network pair.
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 271).
(Figure 272).
271