Table of Contents
Advertisement
Connecting and Configuring the Appliance
Configuring the appliance using the Setup Wizard
• DNS server settings
When you have entered all the information, you must apply the configuration to the appliance.
Depending on the settings entered, the appliance might reboot. After the configuration
information is applied, the console will not appear on reboots, unless you restore the factory
defaults or install new versions of the software.
Configuring the appliance using the Setup Wizard
The Setup Wizard appears automatically when you first connect to the appliance IP address,
and provides a quick way to configure the system.
You can choose to configure the appliance using:
• the Standard Setup option
• the Custom Setup option
In the standard pages, McAfee configure some of the most-commonly used settings for you.
The custom pages enable you to sellect these settings yourself.
Some of the settings in the Setup Wizard reflect choices you made when you used the
Configuration Console.
Logging on to the Setup Wizard
Welcome page
Performing a standard installation
Performing a custom setup
Logging on to the Setup Wizard
Use this task to log on to the Setup Wizard.
Task
1
From a browser on the same network as the appliance, type:
2
At the logon window, type the user name
Setup Wizard appears.
The number of the current Setup Wizard page is highlighted. The Setup Wizard incudes a help
panel to the left of each page.
Welcome page
Use this page to select the type of installation you want to perform.
• Select Standard Setup to configure the appliance for transparent bridge mode only.
• Select Custom Setup (default) to select the network mode you want to use.
Performing a standard installation
For the Standard Setup, the wizard includes these pages:
• Traffic
• Basic Settings
26
McAfee Email and Web Security Appliance 5.1 Installation Guide
https://<IP address>
and password
scmadmin
. The
scmchangeme
Advertisement
Table of Contents
