McAfee SG310 Administration Manual page 218

Firewall menu options
Access control
Enable and configure an NTP server to keep accurate time for certificate validity, reporting, and system
1
logging. See
Activate your McAfee Web Gateway add-on. See
2
Enter your certificate and private key for your McAfee Web Gateway service into the UTM Firewall
3
appliance with the method of your choice. See
Copying and pasting a McAfee Web Gateway certificate and
Enable and configure McAfee Web Gateway content filtering. See
4
filtering.
Select the categories you want to block. See
5
View the reports of the URL filtering in action if your license includes reporting.
6
Enabling McAfee Web Gateway content filtering
Use this procedure to enable and configure McAfee Web Gateway content filtering. The UTM Firewall
appliance dynamically retrieves rating categories from the McAfee Web Gateway server. As such, new
categories might be added after content filtering is configured on your appliance.
Note: Content filtering is not performed for addresses specified in the Web Lists tab > URL Allow or Block pages
or for allowed or blocked hosts specified in the ACL page. See
Prerequisites:
• Ensure the UTM Firewall appliance is configured with a valid DNS server under one of its connections, since
the appliance needs to resolve names in order for the URL filtering to operate. For more information, see
Connections. You generally do not need to specify a DNS server for connections such as dial up serial,
PPPoE ADSL, or for DHCP-assigned connections.
• Upload or copy and paste a certificate and private key. See
and key.
To enable and configure McAfee Web Gateway web filtering service:
From the Firewall menu, select Access Control > Web Filtering > Content Filtering. The Web
1
Filtering URL Filter Service page appears
Figure 220 Web Filtering – Content Filtering tab
Select the Enable content filtering checkbox.
2
[Optional] To allow access to Web sites that the McAfee Web Gateway filtering system has not yet rated,
3
select the Allow accesses that cannot be rated checkbox. The default and recommended behavior is
to block all unrated sites.
218 McAfee UTM Firewall 4.0.4 Administration Guide
Enabling the NTP time server.
Activating a feature.
Uploading a McAfee Web Gateway certificate and key
key.
Enabling McAfee Web Gateway content
Blocking categories for McAfee Web Gateway
Web Lists tab
Uploading a McAfee Web Gateway certificate
(Figure 220).
filtering.
and ACL tab for further details.
or