McAfee SG310 Administration Manual page 43

Network Setup menu options
Network setup
Figure 35 Network Setup Connections page
A network interface is configured or changed by selecting a connection type from the Change Type list.
Click Retry to immediately retry any connections that are currently down or have completely failed.
You can create new virtual network interfaces by selecting an option from the list and clicking Add.
Viewing or editing a connection
The current configuration for a connection can be viewed or edited by clicking its edit icon.
From the Network Setup menu, click Network Setup. The Network Setup Connections tab appears.
1
Select the edit icon for the connection your want to edit. The main configuration page appropriate for the
2
connection appears.
Make your changes and click Update. You can also make changes in the additional tabs that appear for
3
a connection, such as Aliases and IPv6. For more information, see
connection.
Disabling a connection
From the Network Setup menu, click Network Setup. The Network Setup Connections tab appears.
1
Select the enable checkbox for the connection. There should be a check mark present.
2
You are prompted to confirm disabling the connection. Click OK. The check mark no longer appears in the
3
leftmost column.
Enabling a connection
Use this procedure to enable a disabled connection. A connection that can be re-enabled appears as an
empty checkbox in the leftmost column.
From the Network Setup menu, click Network Setup. The Network Setup Connections tab appears.
1
Select the checkbox for the connection. The Enable/Disable checkbox is to the left of the Name column.
2
The page refreshes and a check mark appears in the column
Figure 36 Enabled and disabled connections
McAfee UTM Firewall 4.0.4 Administration Guide
Aliases tab and Enabling IPv6 for a
(Figure 36).
43