Control Center Attributes - McAfee SG310 Administration Manual

System menu features
Management menu
Enter the Registration password in the Registration password and Confirm password fields. This
5
password is provided by your Control Center administrator.
In the Connection timeout field, enter the number of seconds the device should wait without receiving
6
a ping from the Control Center before determining that the connection to the Control Center is down.
Enter the SSH port on Control Center that the Control Center listens to. The default is port 22.
7
Enter the Syslog port on Control Center to which to send syslog messages. This must be the same as
8
the syslog_port configuration setting for the Control Center. THe default is port 514.
Select a logging level from the Syslog Filter list. The setting filters syslog messages sent to the Control
9
Center. Typically, a setting somewhere between the logging everything and nothing is appropriate.
Available options are:
• Absolutely Everything
• Everything but Debug
• Notices, Warnings, and Errors
• Errors and Warnings
• All Error Conditions
• Emergency, Alerts, and Critical Errors
• Emergency and Alerts Errors
• Emergency Errors only
• Log Nothing
Click Submit.
10
Disabling the Control Center
From the System menu, click Management > Control Center Management tab. The Control Center
1
Configuration page appears.
Clear the Enable Central Management checkbox.
2
Click Submit.
3

Control Center Attributes

The Control Center allows devices to be categorized according to user-defined attributes. You can add, edit,
and delete device attributes.
Creating a Control Center attribute
From the System menu, click Management > Control Center Management > Control Center
1
Attributes tab. The Control Center Attributes page appears
Figure 364 Control Center Attributes
Click New. The Edit Control Center Device Attributes page appears
2
352 McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 364).
(Figure 365).