McAfee SG310 Administration Manual page 243

VPN menu features
PPTP VPN Server
From the VPN menu, click PPTP and select the PPTP VPN Server tab. The PPTP Server Setup page
1
appears (Figure 240).
Figure 240 PPTP Server Setup page—basic view
To access the Advanced fields, click Advanced. Additional fields become available for your use
2
(Figure 241).
Figure 241 PPTP Server Setup page — advanced view
Select the Enable PPTP Server checkbox.
3
Enter the free IP Address or range in the IP Addresses to give to remote hosts field. This must be a
4
free IP address, or a range of free IP addresses, from the network (typically the LAN) that remote users
are assigned while connected to the UTM Firewall appliance.
Tip: If required, you can specify a static IP address for a given PPTP user when you create the local user for
PPTP access. The user must also be allocated a dynamic address. For further information, see
user account and Creating a
If you have configured several network connections, select the one that you want to connect remote users
5
to from the IP Address to Assign VPN Server list. This is typically a LAN interface or alias.
McAfee UTM Firewall 4.0.4 Administration Guide
user.
Adding a PPTP
243