McAfee SG310 Administration Manual page 313

VPN menu features
Port tunnels
Figure 318 HTTP Tunnel Client page
Enter a descriptive name for the tunnel client in the Name field.
3
• Can be one or more characters of any type
Ensure the Enable checkbox is selected. It is enabled by default.
4
In the Data Port field, enter the TCP port on which to listen for connections from local hosts to forward
5
across the tunnel. This must match the TCP used by the application client.
• Range: an integer value from 1-65535
Enter the publicly accessible IP address of the remote tunnel server in the Tunnel Server field.
6
Enter the TCP port on which the tunnel server is listening for connections in the Tunnel Port field. This
7
must match the tunnel server's Tunnel Port.
• Default: 80
• Range: an integer value from 1-65535
[Optional] Specify the Content Length to use in HTTP PUT requests.
8
• Default: 102400
• Can be an integer value equal to or greater than 1
[Optional] To force Content Length for all requests, select the Strict Content Length checkbox. This
9
setting always writes content-length bytes in requests.
To specify a maximum age for connections, after which the connection is closed, enter a value in seconds
10
in the Maximum Age field.
• Default: 300
• Can be an integer value equal to or greater than 1
McAfee UTM Firewall 4.0.4 Administration Guide 313