McAfee SG310 Administration Manual page 72

Utm firewall
Table of Contents

Advertisement

Network Setup menu options
Internet connection failover
Figure 72 Custom test type
Enter the custom command to test the connection in the Test Command field. An example script
a
is as follows:
myscript 5 10 ping -c 1 -I $if_netdev 15.1.2.3
Replace $if_netdev with the name of the network interface on which you are running the test, such
as ppp0.
Click Finish. If the Test Command exits with a return code of zero (0), the connection passed the
b
test and is considered up; otherwise, the connection is considered down.
The next step is to modify the failover levels. See
To modify failover levels
The next step of configuring Internet failover is associating Internet connections with primary, secondary,
and optionally tertiary connection levels. Recall that a connection level is one or more connections. These
connections must be marked as Required or Enabled. Internet connections that are marked Disabled
are not part of this connection level. The initial defaults on the modify levels page for a connection are:
• Load balancing — Disabled
• Primary — Enabled
• Secondary — Enabled
• Tertiary — Enabled
A connection level is deemed to be up when all connections marked Required at that level are up, and at
least one connection marked Required or Enabled at that level is also up.
From the Network Setup menu, click Network Setup, select the Failover & H/A tab and click the
1
Modify Levels button. A table is displayed listing each of the connections alongside a list for each
connection level
Figure 73 Connection Failover Modify Levels
First, configure the Primary connection level by selecting an option from the Primary list. If you only have
2
a single Internet connection, setting the level to Enabled or Required has the same effect.
For failover to succeed, you must then configure at least the Secondary connection level for another port
3
or ports. Select Enabled or Required from the Secondary list.
72
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure
73).
To modify failover
levels.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sg560Sg560uSg565Sg580

Table of Contents