McAfee SG310 Administration Manual page 370

System menu features
Advanced menu
Enter the filename, enter the configuration details, and click Finish. The file is added to the list of
3
configuration files. Note that any files you create manually have the "x" attribute (able to delete)
displayed in the Mode column.
Deleting a configuration file
Use this procedure to delete a configuration file. Exercise care when performing this operation as it cannot
be reversed.
Caution: Manually deleting the configuration files of your UTM Firewall appliance may render the appliance
inoperable until a factory erase has been performed.
From the System menu, click Advanced > Configuration Files tab. The Edit File tab appears.
1
Select the delete icon next to the file you want to delete. You are prompted to confirm the delete.
2
Click OK.
3
Tip: You can also click the Delete button at the bottom of the configuration files list. To delete multiple files,
select the checkboxes for the files and click Delete.
Uploading a configuration file
From the System menu, click Advanced > Configuration Files > Upload File tab. The Upload File
1
page appears
Figure 386 Upload Configuration Files
To locate the file on your local PC that you want to upload, click Browse. Locate the file and click Open.
2
Or, type the full path to the file in the File to Upload field.
[Optional] You can upload it to an alternative file name on the UTM Firewall appliance by specifying
3
another name in the Destination File Name field.
Caution: Any existing file with the same name is overwritten.
Click Submit.
4
Directly viewing or editing the configuration file
Use this procedure to access the page where you can directly view or edit the main configuration file of the
appliance.
Caution: Do not edit this file without the assistance of technical support.
370 McAfee UTM Firewall 4.0.4 Administration Guide
(Figure 386).