McAfee SG310 Administration Manual page 145

Network Setup menu options
Traffic Shaping
Figure 151 Add ToS Packet Priority rule
Select a service from the Services list. Or, to define a new service within this page, click New. The
3
Services field changes to the Protocol and Ports fields.
[Conditional, if you are defining a new service within this page] Select a protocol for the service from the
4
Protocol list. Available options are:
• TCP
• UDP
• IP
• ICMP
[Conditional, if you are defining a new service in this page] Enter a port, protocol, or ICMP message type
5
in the Ports field. Acceptable inputs are:
• service name
• single port number between 1 and 65535
• range of port numbers in the form a-b
• comma- or whitespace-separated list of any of the above inputs
Note: Click Show Definitions to select a definition already defined. For more information, see Definitions.
Select a source address from the Source Address list, or click New to enter a new IP address as a
6
source.
Select a destination address from the Source Address list, or click New to enter a new IP address as a
7
source.
Select a Priority from the list. Available options are:
8
• Low
• Medium
• High
Click Finish. The rule is displayed in the Services list. You can edit and delete the definitions as needed
9
(Figure 152).
McAfee UTM Firewall 4.0.4 Administration Guide 145