Dhcp Status Page - McAfee SG310 Administration Manual

Network Setup menu options
DHCP Server
• DHCP Addresses page
• DHCP Relay page

DHCP Status page

Use this page to view the status of the DHCP server, and to configure an interface as a DHCP server or
relay. To access this page, from the Network Setup menu, click DHCP Server. The DHCP status page
appears.
Viewing DHCP Status
To begin configuring a server or relay, select the option you want from the Type list. The initial view of this
page is Not Configured for Status and Type. The status message "DHCP Server is Down" is displayed.
Figure 127 shows the initial view of this page:
Figure 127 DHCP Server—Not Configured
Once a DHCP Server or Relay is configured, this main DHCP server page displays the status for each
interface on which the DHCP server is running, and the status message "DHCP Server is Running" is
displayed. Figure 128
Figure 128 DHCP Server Status—Configured and Running
You can disable and enable the configuration in the leftmost column. The Interface column displays the
interface for which the DHCP server or relay is configured. The Subnet column contains the network on
which the DHCP server is handing out addresses. The Status column displays the number of Used and Free
IP addresses for distribution. The Type column indicates whether the DHCP is configured as a server or a
relay. The edit and delete icons become available after an interface is configured as a DHCP server or relay.
Configuring a DHCP server
Use this procedure to configure a DHCP server for an interface.
Note: To configure your UTM Firewall appliance as a DHCP server, you must set a static IP address and netmask
on the network interface on which you want the DHCP server to run. For more information, see
overview.
From the Network Setup menu, click DHCP Server. The DHCP Server Configuration page appears.
1
For the interface you want to configure, select DHCP Server from the Type list. The Server Configuration
2
page appears
124 McAfee UTM Firewall 4.0.4 Administration Guide
shows a configured and running view of this page:
(Figure 129).
Direct connection