McAfee SG310 Administration Manual page 175

Firewall menu options
NAT
Figure 178 Modify Port Forward (basic)
[Optional] Enter a descriptive name for the rule in the Descriptive Name field.
3
The Enable checkbox is selected by default. To temporarily disable the rule, clear the checkbox.
4
Select an address from the Destination Address list.
5
Select a protocol from the Protocol list. Available options are:
6
• TCP
• UDP
Enter the port or ports in the Ports field. If you want to show the definitions, click Show Definitions.
7
The Protocol and Ports fields are replaced with the Services list. Select a service from the list
(Figure 179).
Figure 179 Port Forward showing service definitions
Enter the destination address in the To Destination Address field.
8
[Conditional; if not using definitions] Enter a port in the Optional To Ports field. If you select Show
9
Definitions for the Ports field, the Optional To Ports field changes to the display-only field "To Services
Unchanged".
Click Finish. Make sure you create an associated packet filter rule. See
10
McAfee UTM Firewall 4.0.4 Administration Guide
Packet filtering.
175