McAfee SG310 Administration Manual page 366

System menu features
Advanced menu
To upgrade your firmware using flash upgrade HTTP
From the System menu, click Advanced > Flash Upgrade tab. The Flash Upgrade via HTTP page
1
appears (Figure
Figure 381 Flash Upgrade (HTTP) page
Click Browse to locate the .sgu file on your local PC.
2
Enter any Extra Parameters only at the request of McAfee technical support staff.
3
Note:
Should you require to downgrade your firmware or restore a configuration from an earlier firmware version,
enter in the Extra Parameters field to circumvent the firmware version checking.
-i
Click Upgrade. Wait for the upgrade to complete.
4
Upgrading flash firmware via TFTP
Trivial File Transfer Protocol (TFTP) is a simplified version of FTP that allows transfer of files between
computers over a network. An alternative method to flash upgrades via HTTP is to install and configure a
TFTP server and use that for flash upgrades.
Note: Although TFTP is an option for upgrading, this program is not supported by McAfee technical support.
Prerequisites:
• Download the binary image file (.sgu). Go to the product Web site for instructions on obtaining this file.
The UTM Firewall Firmware Upgrades page is available from
http://www.securecomputing.com/index.cfm?skey=1597.
• Place the .sgu file in the directory your TFTP is serving files from, usually:
/tftpboot/.
To flash upgrade with TFTP, you can either use the Flash Upgrade (TFTP) page or run a command on the
command line interface.
Upgrading using TFTP from the Management Console
Prerequisites:
• Download the binary image file (.sgu) and place it on the machine running the TFTP server.
366 McAfee UTM Firewall 4.0.4 Administration Guide
).