VPN menu features
IPSec Advanced Setup wizard
Figure 268 Local Interface Gateway
Ensure the Main mode (IKE) is selected in the Keying list.
d
Indicate the Local address, Remote address. This example uses static IP address.
e
Select an authentication scheme from the Authentication list. Available options are:
f
• Preshared Secret
• RSA Digital Key Signature
• x.509 Certificates
This examples uses Preshared Secret for authentication. For further information on available
authentication schemes, refer to Authentication.
Leave the Require XAUTH authentication checkbox unselected.
g
Click Next. The Local Endpoint Settings page appears
3
IPSec tunnel's local endpoint settings. The options that display depend on your previous selections.
Figure 269 IPSec VPN — Local Endpoint Settings page
McAfee UTM Firewall 4.0.4 Administration Guide
(Figure
269). This page allows you to configure an
269