Adaptive Ap Setup - Motorola AP-51 Series Product Reference Manual

4-6 AP-51xx Access Point Product Reference Guide
7. Click Logout
confirming the logout before the applet is closed.

4.2 Adaptive AP Setup

An access point needs settings defined to discover (and adopt) an available switch and establish a
connection and data tunnel. It's through this switch adoption that the access point receives its
adaptive AP (AAP) configuration. A new screen has been added to define the mechanisms used to
adopt a switch and route AAP configuration information
NOTE For an AAP overview and a theoretical discussion of how an access point
NOTE AAP functionality is only supported on a Motorola WS5100 model switch
NOTE The Adaptive AP Setup screen does not display the AAP's adoption status
To configure the access point's switch discovery method and connection medium:
1. Select System Configuration
to securely exit the access point Access Point applet. A prompt displays
discovers a switch to creates a secure data tunnel for adaptive AP
operation, see Adaptive AP on page
(running firmware version 3.1) or higher and a Motorola
RFS6000/RFS7000 model switch (running firmware version 1.1 or higher).
or adopted switch. This information is available using the access point's
CLI. To review AAP adoption status and adopted switch information, see
AP51xx>admin(system.aap-setup)>show on page
-> Adaptive AP Setup
.
10-1.
8-152.
from the menu tree.