Motorola AP-51 Series Product Reference Manual page 221

Set RF QoS
7. Select the Advanced Settings
them as primary WLANs.
Click the Set RF QoS button to display the
set QoS parameters for the radio. Do not confuse with the QoS
configuration screen used for a WLAN. The Set RF QoS screen
initially appears with default values displayed.
Select manual from the
to edit the CW min and
(Arbitrary Inter-Frame Space Number) and
Access Category. These are the QoS policies for the 802.11a or
802.11b/g radio, not the QoS policies configured for the WLAN (as
created or edited from the
screen).
Motorola recommends only advanced users manually set these
values. If the type of data-traffic is known, use the drop-down
menu to select a 11g-wifi, 11b-wifi, 11g-default,
11b-voice
11g-voice or
traffic, default is typical data traffic and voice is for "Voice-Over-IP"
supported wireless devices.
Click OK to implement the selected QoS values and return to the
802.11a or 802.11b/g radio configuration screen. Clicking
reverts the screen to the last saved configuration.
tab to strategically map BSSIDs to WLANs in order to define
Set RF QOS
Select Parameter set
CW max (contention window),
TXOPs Time
Quality of Service Configuration
option. Wifi represents multimedia
Network Management
screen to
drop-down menu
AIFSN
for each
11b-default,
Cancel
5-63