Motorola AP-51 Series Product Reference Manual page 228

5-70 AP-51xx Access Point Product Reference Guide
2. Within the
radio is servicing its coverage area as a typical access point or as a WIPS sensor.
Selecting the
WIPS checkbox defines the radio as a WIPS sensor.
3. Define a primary and alternate WIPS server IP Address within the
WIPS Server 2
This is the address of the WIPS console server.
4. Click Apply
without clicking Apply results in all changes to the screens being lost.
5. Click Undo Changes
settings displayed on the WIPS screen to the last saved configuration.
6. Click Logout
logout before the applet is closed.
WIPS Status field, define whether the access point's 802.11a or 802.11b/g
WLAN checkbox defines the radio as a typical access point. Selecting the
fields.
to save any changes to the WIPS screen. Navigating away from the screen
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point applet. A prompt displays confirming the
WIPS Server 1 and