Configuring Port Forwarding - Motorola AP-51 Series Product Reference Manual

NAT Type
Outbound Mappings
Inbound Mappings
Port Forwarding
3. Click Apply to save any changes to the NAT screen. Navigating away from the screen
without clicking the Apply button results in all changes to the screens being lost.
4. Click Undo Changes
settings displayed on the NAT screen to the last saved configuration.
5. Click Logout
logout before the applet is closed.

5.2.1.1 Configuring Port Forwarding

Use the Port Forwarding
the associated WAN IP address.
Specify the NAT Type as
host (local) IP address. 1 to 1 mapping is useful when users need
dedicated addresses, and for public-facing servers connected to
the access point.
Set the NAT Type as
multiple local IP addresses. This displays the
the adjacent Outbound Mappings field. This button displays a
screen for mapping the LAN IP addresses that are associated with
each subnet.
Define the NAT Type as
on the internal network.
When 1 to 1 NAT is selected, a single IP address can be entered in
the Outbound Mappings
mapping of the WAN IP address to the specified IP address.
When 1 to Many
Mappings area displays a
select the LAN1 or LAN2 IP address used to set the outbound IP
address or select
If none is selected as the NAT Type, The Outbound Mappings area
is blank.
When 1 to 1 or
option displays a
Click the Port Forwarding
forwarding parameters for inbound traffic from the associated
WAN IP address. for information on configuring port forwarding,
see Configuring Port Forwarding on page
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the Access Point applet. A prompt displays confirming the
screen to configure port forwarding parameters for inbound traffic from
1 to 1 to map a WAN IP address to a single
1 to Many to map a WAN IP address to
none when routable IP addresses are used
area. This address provides a 1 to 1
is selected as the NAT Type, the Outbound
mappings button. Click the button to
none to exclude the IP address.
1 to Many is selected, the
Port Forwarding button.
button to display a screen of port
Network Management
mappings
button in
Inbound Mappings
5-23.
5-23