Motorola AP-51 Series Product Reference Manual page 225

Weighted Round-
Robin
4. Configure the Bandwidth Share for Each WLAN
using the Weighted Round-Robin option) for each WLAN. The weight% changes as the
weight is entered.
If a WLAN has not been enabled from the
Bandwidth Management
LANs (WLANs) on page
WLAN Name
Weight
Weight (%)
QoS Policy
5. Click Apply to save any changes to the Bandwidth Management screen. Navigating away
from the screen without clicking Apply results in all changes to the screens being lost.
6. Click Undo Changes
settings displayed on the Bandwidth Management screen to the last saved configuration.
7. Click Logout to securely exit the Access Point applet. A prompt displays confirming the
logout before the applet is closed.
If selected, a weighting (prioritization) scheme (configured within
the QoS Configuration screen) is used to define which WLANs
access point
receive resources first.
Wireless
screen. To enable a specific WLAN, see
5-27.
Displays the name of the WLAN. This field is read-only. To change
the name of the WLAN, see
page 5-30.
This column is not available unless
selected. Assign a weight to each WLAN. This percentage equals
access point
the bandwidth share for that WLAN when network
traffic is detected.
This column is automatically updated with the appropriate WLAN
bandwidth share when the
Displays the name of the QoS policy defined for each WLAN within
the Quality of Service for WLAN
set, the WLAN uses the default policy. For information on assigning
QoS policies for specific WLANs, see
Service (QoS) Policy on page
(if necessary) to undo any changes made. Undo Changes reverts the
field to set a raw weight (for WLANs
screen, it is not configurable using the
Creating/Editing Individual WLANs on
Weighted Round-Robin
Weight is modified.
screen. If no policy has been
Setting the WLAN Quality of
5-40.
Network Management
Enabling Wireless
is
5-67