Motorola AP-51 Series Product Reference Manual page 241

6.2 Setting Passwords
Before setting the access point security parameters, verify an administrative password for the access
point has been created to restrict access to the device before advanced device security is configured.
To password protect and restrict access point device access:
1. Connect a wired computer to the access point LAN port using a standard CAT-5 cable.
2. Set up the computer for TCP/IP DHCP network addressing and make sure the DNS settings
are not hardcoded.
3. Start Internet Explorer (with Sun Micro Systems' Java Runtime Environment (JRE) 1.5 or
higher installed) and type in the default IP address in the address field.
To connect to the access point, the IP address is required. If connected to the access point
using the WAN port, the default static IP address is 10.1.1.1. The default password is
" ." If connected to the access point using the LAN port, the default setting is DHCP
motorola
client. The user is required to know the IP address to connect to the access point using a
Web browser.
The access point Login screen displays.
NOTE For optimum compatibility use Sun Microsystems' JRE 1.5 or higher
NOTE DNS names are not supported as a valid IP address for the access point.
4. Log in using the "admin" as the default Username and "motorola" as the default
Password.
If the default login is successful, the
the default login and password to significantly decrease the likelihood of hacking.
(available from Sun's Web site), and be sure to disable Microsoft's Java
Virtual Machine if it is installed.
The user is required to enter a numerical IP address.
Change Admin Password
Configuring Access Point Security
window displays. Change
6-3