Motorola AP-51 Series Product Reference Manual page 208

5-50 AP-51xx Access Point Product Reference Guide
8. Refer to the
port and shared secret password.
Select mode
Pri Server IP
Pri Port
Pri Secret
Sec Server IP
Sec Port
Sec Secret
9. Click OK
the screen without clicking Apply results in all changes to the screens being lost.
10. Click Cancel
on the Hotspot Configuration screen to the last saved configuration.
Defining the Hotspot White List
To host a Login, Welcome or Fail page on the external Web server, the IP address of that Web server
should be in access point's White List.
NOTE If using an external Web Server over the WAN port, and the hotspot's
Radius Configuration
Use the Select mode
Internal or External server is to be used for the primary server.
Define the IP address of the primary Radius server. This is the
address of your first choice for Radius server.
Enter the TCP/IP port number for the server acting as the primary
Radius server. The default port is 1812.
Enter the shared secret password used with the primary Radius
Server.
Define the IP address of the secondary Radius server. This is the
address of your second choice for Radius server.
Enter the TCP/IP port number for the server acting as the secondary
Radius server. The default port is 1812.
Enter the shared secret password used with the secondary Radius
Server.
to save any changes to the Hotspot Configuration screen. Navigating away from
(if necessary) to undo any changes made. Cancel reverts the settings displayed
HTTP pages (login or welcome) redirect to the access point's WAN IP
address for CGI scripts, the IP address of the external Web server and the
access point's WAN IP address should be entered in the White List.
field to define a primary and secondary Radius server
drop-down menu to define whether an