Adaptive Ap Setup - Motorola AP-7131 Product Reference Manual

4-8 AP-7131 Access Point Product Reference Guide
Radio Select
2. Click Apply
screen without clicking the Apply button results in all changes to the screen being lost.
3. Click Undo Changes
settings displayed on the Power Settings screen to the last saved configuration.
4. Click Logout
confirming the logout before the applet is closed.

4.3 Adaptive AP Setup

An access point needs settings defined to discover (and adopt) an available switch and establish a
connection and data tunnel. It's through this switch adoption that the access point receives its
adaptive AP (AAP) configuration. An AP-7131 has a screen to define the mechanisms used to adopt
a switch and route AAP configuration information
NOTE For an AAP overview and a theoretical discussion of how an access point
NOTE AAP functionality is only supported on a Motorola WS5100 model switch
NOTE The Adaptive AP Setup screen does not display the AAP's adoption status
To configure the access point's switch discovery method and connection medium:
1. Select System Configuration
Select either
for some reason available power to the AP-7131 changes in a
manner that only allows one access point radio to be adequately
powered.
to save any changes to the Power Settings screen. Navigating away from the
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point Access Point applet. A prompt displays
discovers a switch to creates a secure data tunnel for adaptive AP
operation, see Adaptive AP on page
(running firmware version 3.1) or higher and a Motorola RFS7000 model
switch (running firmware version 1.1 or higher).
or adopted switch. This information is available using the access point's
CLI. To review AAP adoption status and adopted switch information, see
AP7131>admin(system.aap-setup)>show on page
->
Radio 1 Radio 2
or (from the Radio Select field) if
.
10-1.
Adaptive AP Setup
8-161.
from the menu tree.