Motorola AP-51 Series Product Reference Manual page 237

The screen displays with both the
checkboxes selected by default. Consequently, if you enable IP filtering but do not apply any
filters that allow IP traffic, then no IP traffic will be forwarded, as the default deny settings
have precedence.
2. Use the Filter name
3. Set the Direction
4. Apply an Action of Allow or Deny to permit or restrict the rules of this filter in the direction
selected.
5. Select Add to apply the filter(s) (and their rules and permissions) to the LAN or WLAN.
6. Click OK add the IP filter to the LAN or WLAN. Navigating away from the screen without
clicking OK results in all changes to the screens being lost.
7. Click Cancel to securely exit the IP Filtering screen without saving your changes.
Default Incoming Deny
drop menu to select an existing filter.
as Incoming or Outgoing as required.
Network Management
and Default Outgoing Deny
5-79