Motorola AP-51 Series Product Reference Manual page 182

5-24 AP-51xx Access Point Product Reference Guide
To configure port forwarding for the access point:
1. Select Network Configuration
2. Select 1 to 1
3. Click on the
4. Configure the
Add
Delete
Name
Transport
->
or 1 to Many from the NAT Type drop-down menu.
Port Forwarding button within the
Port Forwarding screen to modify the following:
Click Add to create a local map that includes the name, transport
protocol, start port, end port, IP address and Translation Port for
incoming packets.
Click Delete to remove a selected local map entry.
Enter a name for the service being forwarded. The name can be any
alphanumeric string and is used for identification of the service.
Use the Transport
protocol used in this service. The choices are ALL, TCP, UDP, ICMP,
AH, ESP, and GRE.
WAN -> NAT from the access point menu tree.
Inbound Mappings
pull-down menu to specify the transport
area.