Motorola AP-51 Series Product Reference Manual page 348

7-30 AP-51xx Access Point Product Reference Guide
1. Select Status and Statistics
2. Highlight a specific MU.
3. Select the
4. Refer to the
IP Address
WLAN Association
PSP State
HW Address
Radio Association
QoS Client Type
Encryption
5. Refer to the
Packets per second
->
MU Details button.
MU Properties field to view MU address information.
Displays the IP address of the MU.
Displays the name of the WLAN the MU is associated with. Use
this information to assess whether the MU is properly grouped
within that specific WLAN.
Displays the current PSP state of the MU. The
two potential settings. PSP indicates the MU is operating in Power
Save Protocol mode. In PSP, the MU runs enough power to check
for beacons and is otherwise inactive. CAM indicates the MU is
continuously aware of all radio traffic. Motorola recommends CAM
for those MUs transmitting with the AP frequently and for periods
of time of two hours.
Displays the Media Access Control (MAC) address for the MU.
Displays the name of the AP MU is currently associated with. If the
name of the
System Settings on page
Displays the data type transmitted by the mobile unit. Possible
types include Legacy, Voice,
For more information, see
(QoS) Policy on page
Displays the encryption scheme deployed by the associated MU.
Traffic field to view individual MU RF throughput information.
The Total column displays average total packets per second
crossing the MU. The
per second received on the MU. The
average total packets per second sent on the MU. The number in
black represents Pkts per second for the last 30 seconds and the
number in blue represents Pkts per second for the last hour.
MU Stats from the access point menu tree.
access point
requires modification, see
4-2.
WMM Baseline
Setting the WLAN Quality of Service
5-40.
Rx column displays the average total packets
PSP Mode field has
Configuring
and Power Save.
Tx column displays the