Table of Contents
Advertisement
Power Mode
Power Status
3. Click
Apply
to save any changes to the Power Settings screen. Navigating away from the
screen without clicking the Apply button results in all changes to the screen being lost.
4. Click
Undo Changes
settings displayed on the Power Settings screen to the last saved configuration.
5. Click
Logout
logout before the applet is closed.
4.3 Adaptive AP Setup
An access point needs settings defined to discover (and adopt) an available switch and establish a
connection and data tunnel. It's through this switch adoption that the access point receives its
adaptive AP (AAP) configuration. The access point has a screen to define the mechanisms used to
adopt a switch and route AAP configuration information
NOTE For an AAP overview and a theoretical discussion of how an access point
NOTE AAP functionality is only supported on a Motorola Solutions model switch
NOTE The Adaptive AP Setup screen does not display the AAP's adoption status
When the access point is powered on for the first time, the system
determines the power budget available to the access point. Using
the
Auto
setting (default setting), the access point automatically
determines the best power configuration based on the available
power budget.
If
3af
is selected, the AP assumes 12.95 watts are available. If the
mode is changed, the access point requires a reset to implement
the change.
Refer to the (read-only) power status field to review the power
available to the AP. For an AP-7131N-FGR model, the options are:
3at, 3af, or Full Power.
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point applet. A prompt displays confirming the
discovers a switch to creates a secure data tunnel for adaptive AP
operation, see
Adaptive AP on page
(running firmware version 4.0) or higher and a Motorola Solutions
RFS7000 model switch (running firmware version 4.0 or higher).
or adopted switch. This information is available using the access point's
CLI. To review AAP adoption status and adopted switch information, see
AP7131N>admin(system.aap-setup)>show on page
.
10-1.
8-168.
System Configuration
4-11
Advertisement
Table of Contents
