Motorola AP-51 Series Product Reference Manual page 152

4-56 AP-51xx Access Point Product Reference Guide
CAUTION Loaded and signed CA certificates will be lost when changing the
!
If a firmware update is required, use the
a file location for updating the firmware.
NOTE The firmware file must be available from an FTP or TFTP site to perform
CAUTION Make sure a copy of the access point's configuration is exported
!
To conduct a firmware update on the access point:
1. Export the access point current configuration settings before updating the firmware to have
the most recent settings available after the firmware is updated.
Refer to
access point's current configuration to have it available after the firmware is updated.
2. Select System Configuration
access point's firmware version using either the GUI or CLI. After a
certificate has been successfully loaded, export it to a secure location
to ensure its availability after a firmware update.
If restoring the access point's factory default firmware, you must
export the certificate file BEFORE restoring the access point's factory
default configuration. Import the file back after the updated firmware
is installed. For information on using the access point CLI to import
and export the access point's configuration, see
AP51xx>admin(system.cmgr)> impcert on page 8-170
AP51xx>admin(system.cmgr)> expcert on page
the update.
before updating the firmware.
Importing/Exporting Configurations on page 4-49
Firmware Update screen to specify a filename and define
- > Firmware Update
and
8-169.
for instructions on exporting the
from the access point menu tree.