Motorola AP-51 Series Product Reference Manual page 597

AP51xx>admin(system.fw-update)>set
Description:
Defines access point firmware update settings and user permissions.
Syntax:
set fw-auto <mode>
cfg-auto <mode>
file <name>
path <path>
server <ip>
user <name>
passwd <password>
admin(system.fw-update)>set fw-auto enable
admin(system.fw-update)>set cfg-auto enable
admin(system.fw-update)>set file 2.0.0.0-29D
admin(system.fw-update)>set path c:/fw
admin(system.fw-update)>set server 157.235.111.22
admin(system.fw-update)>set user mudskipper
admin(system.fw-update)>set passwd muddy
For information on updating access point device firmware using the applet (GUI), see
When enabled, updates device firmware each time the firmware versions are found to be
different between the access point and the specified firmware on the remote system.
When enabled, updates device configuration file each time the confif file versions are
found to be different between the access point and the specified LAN or WAN interface.
Defines the firmware file name (1 to 39 characters).
Specifies a path for the file (1 to 39 characters)..
The IP address for the FTP/TFTP server used for the firmware and/or config file update.
Specifies a username for FTP server login (1 to 39 characters).
Specifies a password for FTP server login (1 to 39 characters). Default is motorola.
Updating Device Firmware on page
8-239
4-54.