RIP v1
RIP v2 (v1 compat)
RIP v2
2. Select a routing direction from the
directions),
Rx only
RIP version 1 is a mature, stable, and widely supported protocol. It
is well suited for use in stub networks and in small autonomous
systems that do not have enough redundant paths to warrant the
overhead of a more sophisticated protocol.
RIP version 2 (compatible with version 1) is an extension of RIP v1's
capabilities, but it is still compatible with RIP version 1. RIP version
2 increases the amount of packet information to provide the a
simple authentication mechanism to secure table updates.
RIP version 2 enables the use of a simple authentication
mechanism to secure table updates. More importantly, RIP version
2 supports subnet masks, a critical feature not available in RIP
version 1. This selection is not compatible with RIP version 1
support.
RIP Direction
(receive only), and
TX only
drop-down menu.
Both
(transmit only) are available options.
Network Management
5-73
(for both