Creating/Editing Individual Wlans - Motorola AP-51 Series Product Reference Manual

5-30 AP-51xx Access Point Product Reference Guide

5.3.1 Creating/Editing Individual WLANs

If the WLANs displayed within the
requirements, you can either create a new WLAN or edit the properties of an existing WLAN.
NOTE Before editing the properties of an existing WLAN, ensure it is not being
CAUTION When using the access point's hotspot functionality, ensure MUs are
!
Use the New WLAN and Edit WLAN screens as required to create/modify a WLAN. To create a new
WLAN or edit the properties of an existing WLAN:
1. Select Network Configuration
The Wireless Configuration screen displays.
2. Click the
button to modify an existing WLAN. Either the
Wireless Configuration
used by an access point radio, or is a WLAN that is needed in its current
configuration. Once updated, the previous configuration is not available
unless saved.
re-authenticated when changes are made to the characteristics of a
hotspot enabled WLAN, as MUs within the WLAN will be dropped
from device association.
Create button to configure a new WLAN, or highlight a WLAN and click the
screen do not satisfy your network
-> Wireless from the access point menu tree.
New WLAN or Edit WLAN screen displays.
Edit