Motorola AP-51 Series Product Reference Manual page 265

2. Refer to the Global Firewall Disable
Disable Firewall
3. Refer to the
Timeout Configuration
translations.
NAT Timeout
field to enable or disable the access point firewall.
Select the Disable Firewall
functions on the access point. This includes firewall filters, NAT, VP,
content filtering, and subnet access. Disabling the access point
firewall makes the access point vulnerable to data attacks and is
not recommended during normal operation if using the WAN port.
field to define a timeout interval to terminate IP address
Network Address Translation (NAT) converts an IP address in one
network to a different IP address or set of IP addresses in a
different network. Set a
access point
uses to terminate the IP address translation process
if no translation activity is detected after the specified interval.
Configuring Access Point Security
checkbox to disable all firewall
NAT Timeout interval (in minutes) the
6-27