Configuring Router Settings - Motorola AP-51 Series Product Reference Manual

5.5 Configuring Router Settings

The access point router uses routing tables and protocols to forward data packets from one network
to another. The access point router manages traffic within the network, and directs traffic from the
WAN to destinations on the access point managed LAN. Use the
connected routes. To access the Router screen.
1. Select Network Configuration
2. Refer to the access point
The access point Router Table field displays a list of connected routes between an enabled
subnet and the router. These routes can be changed by modifying the IP address and subnet
masks of the enabled subnets.
The information in the access point Router Table is dynamically generated from settings
applied on the
mask (or network mask) and gateway settings are those belonging to each subnet. Displayed
-> Router
Router Table
WAN screen. The destination for each subnet is its IP address. The subnet
Router
from the access point menu tree.
field to view existing routes.
Network Management
screen to view the router's
5-71