Warnings; Site Preparation; Ap-0622 Package Contents - Motorola AP-0622 Installation Manual

Installation Guide

1.2 Warnings

• Read all installation instructions and site survey reports, and verify correct equipment installation before
connecting the AP-0622 model access point.
• Remove jewelry and watches before installing this equipment.
• Verify the unit is grounded before connecting it to the power source.
• Verify any device connected to this unit is properly wired and grounded.
• Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment
operation specifications.

1.3 Site Preparation

• Consult your site survey and network analysis reports to determine specific equipment placement, power
drops, and so on.
• Assign installation responsibility to the appropriate personnel.
• Identify and document where all installed components are located.
• Ensure adequate, dust-free ventilation to all installed equipment.
• Identify and prepare Ethernet and console port connections.
• Verify cable lengths are within the maximum allowable distances for optimal signal transmission.

1.4 AP-0622 Package Contents

An AP-0622 access point is available in integrated antenna and external antenna models. Contents differ
depending on the model ordered.
1.4.1 External Antenna Model Package Contents
• AP-0622 access point with external antenna connectors (Plenum Rated)
• 2 customer installed mounting lugs
• 4 mounting lug retaining screws
• AP-0622 Installation Guide (This Guide)
1.4.2 Internal Antenna Model Package Contents
• AP-0622 access point with internal antennas
• AP-0622 Installation Guide (This Guide)
5