Motorola AP-51 Series Product Reference Manual page 132

4-36 AP-51xx Access Point Product Reference Guide
2. Configure the
modify the following:
Add
Delete
Destination IP
Port
Community
SNMP v1/v2c Trap Configuration
Click Add to create a new SNMP v1/v2c Trap Configuration entry.
Click Delete to remove a selected SNMP v1/v2c Trap
Configuration entry.
Specify a numerical (non DNS name) destination IP address for
receiving the traps sent by the access point SNMP agent.
Specify a destination User Datagram Protocol (UDP) port for
receiving traps. The default is 162.
Enter a community name specific to the SNMP-capable client that
receives the traps.
field (if SNMP v1/v2c Traps are used) to