RADVision SCOPIA XT1000 Piccolo Administrator's Manual page 26

Before you begin
Ensure you have the IP addresses and the subnet mask of the computers which you want to
use for remote management of SCOPIA XT Series.
Procedure
Step 1
Step 2
Step 3
RADVISION | Administrator Guide for SCOPIA XT4000 Series Version 3.0
•
Monitoring - SCOPIA iVIEW Management Suite can request identification and access
capabilities from the endpoint.
•
Status traps - SCOPIA iVIEW Management Suite is able to detect if the terminal is turned
on, and its call status.
Access the SCOPIA XT Series web interface.
In the Administrator settings tab, select Utilities > Remote Access > SNMP.
Figure 2-10
Set the fields as required.
Configuring SNMP settings
Maintenance Tasks | 22