RADVision SCOPIA XT1000 Piccolo Administrator's Manual page 21

Scopia xt series
Hide thumbs Also See for SCOPIA XT1000 Piccolo:
Table of Contents

Advertisement

Before you begin
During this procedure you need to enter the IP address and the subnet mask associated with
this IP address. Make sure you have this information. Contact your network administrator for
details if necessary.
Procedure
Step 1
Step 2
Step 3
Step 4
RADVISION | Administrator Guide for SCOPIA XT4000 Series Version 3.0
Access the SCOPIA XT Series web interface.
In the Administrator Settings tab, select Utilities > Remote Access > Download.
Figure 2-5
Set the fields as required.
Table 2-3
Enabling remote upgrade
Field Name
Download management Enables/disables downloading of firmware or patches to the XT
Enable all addresses
Address
SubNet mask
Press Save.
Enabling remote access to the SCOPIA XT Series
Description
Codec Unit.
If set to Yes, enables access to the XT Codec Unit from any IP
address in a network. If set to No, configure Address and SubNet
mask.
Enter the IP address allowed to access the XT Codec Unit.
Enter the SubNet mask associated with the IP address.
Maintenance Tasks | 17

Advertisement

Table of Contents
loading

Table of Contents