Entering Function Codes - Ingenico EFT930G User Manual

1. At the READY prompt, press the MENU button twice. The
TOTALS option will be highlighted. Press the GREEN button
and the TOTALS menu will be displayed.
2. Use the arrow buttons to view the available options
and press the GREEN button when the End of Day option is
highlighted.
You will then be asked to swipe the Supervisor Card or enter
Supervisor code.
3. Press the GREEN button to proceed.
4. You will now have the choice of selecting totals for ALL
card types or selecting those card types you wish to bank.
5. Press the GREEN button to reconcile ALL card types and the
terminal will contact each acquirer in turn before printing the
report or press the YELLOW button to select the acquirers you
wish to reconcile. Please note: This screen will only be dis-
played if your terminal is set up with more than one acquirer.
6. You will now be shown a list of the individual acquirers.
Press the GREEN button to reconcile an acquirer or press the
YELLOW button if you do not want to reconcile a particular
acquirer.
7. Once the desired acquirers have been selected, the
terminal will dial the selected acquirers. You will be prompt-
ed to wait while the terminal prints a banking report.
8. After all acquirers have been banked, tear off the receipt
and press the GREEN button. The terminal will return to the
READY prompt.
Please note: If Stored or Session Totals Not Agreed is printed on your End of Day receipt, please
contact Customer Services.

30. Entering Function Codes

There may be occasions when you have further requirements of your terminal. These can be met
through the use of Function Codes.
1. At the READY prompt, press the MENU button twice. Use the arrow buttons to view the available
options and press the GREEN button when the Select Function option is highlighted.
2. Key enter the function code required and then press the GREEN button.
SYSTEM MENU
Totals
Print Function Codes
Select Function
TOTALS MENU
End-of-Day Banking
Z-Totals
X-Totals
EFT
End-of-Day Banking?
Enter=YES
Select card types to be
banked
Press ENTER for ALL
Press CLEAR to SELECT
End-of-Day Banking
Bank <aquirier>
Enter=YES
Clear=NO
Clear=NO
Page 27