Entering Function Codes; Waiter Ids (Restaurants) - Ingenico iCT200 Series User Manual

33. Entering Function Codes

There may be occasions when you have further requirements of your terminal. These can be met
through the use of Function Codes.
1. At the READY prompt, press the MENU button until the
System Menu is displayed. Use the arrow buttons to view
the available options and press the GREEN button when
the Select Function option is highlighted.
2. Key enter the function code required and then press
the GREEN button.
Once the function code has been entered, follow the prompts displayed by the terminal. You may
be prompted to swipe your Supervisor Card or enter the Supervisor code.
The following codes are available for you to use:
CODE
16
30
33
40
86

34. Waiter IDs (Restaurants)

Default Waiter 0
A default waiter, Waiter 0: SHARED will be created automatically by the terminal. This can be used
if you do not want to create individual Waiter IDs.
All Sale transactions with gratuity will add tips/gratuities to this waiter without the need for a waiter
ID to be entered during transaction processing.
The total of all Waiter 0 tips/gratuities will be printed as part of the Waiter Totals Report showing
the total value of tips/gratuities performed.
Adding an Individual Waiter ID
Your terminal can be configured to recognise individual Waiter IDs. These make it possible to
identify which staff member has dealt with the transaction. The Waiter ID will be printed on the
receipt.
Page 30
TITLE
Print Transaction Log
Set Date/Time
Power Up Banner
Waiter Setup
Connection Test
SYSTEM MENU
Totals
Print Function Codes
Select Function
DESCRIPTION
Refer to section 36
Refer to section 35
Refer to section 37
Refer to section 31
Allows you to connect to Host