Removing And Installing Lumbar Adjustment Lever (Jetta 2010 ▸, Golf Variant 2010 ▸) - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
General body repairs, interior - Edition 12.2009
– Pull rear section of trim -3- outwards, then swing trim down‐
wards -arrow A-.
– Detach rear trim from seat.
– Pull front section of trim -4- upwards, then swing trim outwards
-arrow B-.
– Press front section of trim to rear -arrow C-.
– Detach front section of trim from seat and disconnect wiring
harnesses from switches -5-.
1.6.2 Installing
– Install in reverse order of removal.
1.7 Removing and installing lumbar adjust‐
ment lever (Jetta 2010 ▸, Golf Variant
2010 ▸)
The lumbar adjustment lever is optionally installed on the follow‐
ing seats:
♦ Front seats with manual height adjustment
♦ Front passenger seat with through-loading function
262
Rep. Gr.72 - Seat frames