Removing And Installing Left And Right Trim On Folding Front Passenger Seat - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
General body repairs, interior - Edition 12.2009
Installing
– Install in reverse order of removal.
1.4 Removing and installing left and right
trim on folding front passenger seat
1.4.1 Removing and installing right trim on folding front passenger seat
Removing
– Using a small screwdriver, press metal tab of fastener -2- in‐
wards and pull off handle -3- from adjustment lever -1-.
Note
For greater clarity, the retaining clip is shown removed in the illustration.
– Remove retaining clip -2- from adjustment lever -1-.
– Using assembly tool -3399- , grasp behind lever -4- of backrest
release.
– Lever assembly tool -3399- outwards -arrow A- and thereby
disengage backrest release lever from seat.
– Using assembly tool -3399- , grasp behind locking device of
backrest adjustment knob -5-.
– Lever assembly tool -3399- outwards -arrow B- and release
backrest adjustment knob from seat.
– Press clamping pin -6- inwards and remove fastener -7-.
– Detach trim -8- forwards from mountings in seat frame.
258
Rep. Gr.72 - Seat frames