Volkswagen Golf Variant 2007 Workshop Manual page 207

– On the right side loosen the nut -1- 2 to 3 turns (18 Nm).
– On the left side loosen the fuse holder securing bolt -3- (2 Nm).
– Loosen the two nuts -4- 2 to 3 turns (18 Nm).
Aligning height of dash panel
Note
The height of the dash panel is set using eccentric bolts -2- and -5-.
♦
In the default position the longer surface of the eccentric faces the outside of the vehicle.
♦
The eccentric must not be turned further than ±90° from the default position.
♦
– Set the required height of the dash panel using eccentric bolts
-2- and -5-.
Aligning dash panel horizontally
– Slide dash panel to desired position.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
General body repairs, interior - Edition 12.2009
199
1. Dash panel