Volkswagen Golf Variant 2007 Workshop Manual page 262

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
General body repairs, interior - Edition 12.2009
– Lock side airbag wiring harness -6- into coupling station.
– Depending on equipment fitted to vehicle, reconnect all other
wiring harnesses into coupling station.
– Secure wiring harness in fastener on floor and fit cover cap
-5- onto coupling station.
– Reinstall seat drawer, if fitted.
– Switch ignition on.
WARNING
Ensure that nobody is in vehicle.
– Reconnect vehicle battery ⇒ Electrical system; Rep. Gr. 27 ;
Disconnecting and reconnecting battery .
– Move seat to forwardmost position using longitudinal adjust‐
ment.
– Tighten bolt -3- (40 Nm).
– Tighten bolt -4- (40 Nm).
WARNING
If, when installing a seat a thread in seat cross member mount‐
ing plate is damaged, reworking damaged threads is prohibi‐
ted! In this case, the seat cross member mounting plate must
be replaced.
254
Rep. Gr.72 - Seat frames