Volkswagen Golf Variant 2007 Workshop Manual page 175

WARNING
Basic setting must be carried out with seat unoccupied.
Installation is basically carried out in the reverse sequence; note
the following when doing this:
– Secure insert profile -2- using double-sided adhesive tape
-3- to seat frame -1- as shown.
– Clip pressure hose -6- into retainer. Start by clipping into re‐
tainer nearest to pressure sensor for seat occupied recogni‐
tion -G452- -5- and end by clipping into retainer nearest to
connector -3-.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
General body repairs, interior - Edition 12.2009
5. Seat occupied recognition (USA)
167